Why Do Snowboarders Wear Goggles Under Helmets?
Goggles are a common part of snowboarding gear. They are worn to prevent snow and cold air from entering or bothering your eyes and they also act as a safety feature for snowboarders down the mountain.
Wearing a helmet with goggles underneath is more comfortable because the goggles help to seal in warm air and create a smooth surface. It minimizes gaps that might cause cold air to enter the headgear.
Goggle protection is important because the goggles are continuously exposed to the harsh winter weather. Snowboarders wear goggles under their helmets to avoid leaving a gap for cold air and it is more comfortable.
It is best to also wear a warm hat under your helmet and goggles. This will keep you the warmest and is the most comfortable method. You can put your hat or beanie on followed by the goggles with a helmet on top of everything.
What Happens If I Wear Goggles Over My Helmet?
Some riders may actually prefer to keep them over the helmet instead. This is not necessarily the wrong thing to do and it depends entirely on your riding experience and personal preference.
Typically, younger riders with more experience prefer to wear goggles under their helmets because they can take helmets off faster and they aren’t as concerned with falling down as often as a beginner would be.
Other factors that could determine what is best for you is the style of helmet you have, the size of your goggles, and how much you think you would be removing your helmet during the day.
For example, riders who wear a Go-Pro tend to remove helmets often during their runs so it is best to keep goggles underneath. This is an example of an experienced rider looking to improve style on the mountain too.
How To Put Your Goggles On Under Your Helmet
We all know that snowboarding is a dangerous sport to be involved in. It can be hard to see ahead of you when you are riding down the slopes. That is why it is important for anyone who is going to snowboard, no matter how seasoned they are, to put their goggles on under their helmet.
It will ensure that your goggles stay in place going over bumpy terrain and improve comfort throughout the day. This will help you stay more focused on riding with better visibility in the cold conditions.
1. Start By Putting On Your Hat or Beanie
You have to put on your hat before you go snowboarding because it protects your head from the cold weather. It is recommended to always wear a hat or beanie under your snowboard helmet for extra warmth and head protection too.
Be sure to get a hat that fits you tightly and goes well under your helmet. A hat that is bulkier could be an issue when trying to fit your helmet and goggles over it later on.
2. Put Goggles On Over Your Hat Firmly
After you put your hat on, put your goggles on firmly and adjust them as needed to fit tightly for your snowboarding adventure. They should be the right size so fitting them around your head and hat isn’t a concern.
Before you wear your goggles, make sure that you adjust them as tight as possible without being uncomfortable. You want them to feel comfortable but be tight enough so they are not moving around while you are riding.
3. Put Your Helmet On
Now you can put your snowboarding helmet on over your hat and goggles. Depending on the helmet type and size, the fit should be snug yet comfortable too. You want to make sure that it will not be moving around a lot on your head during the day.
One tip to remember with your helmet is that you should not be able to fit more than two fingers between your chin strap or else this indicates it is not fastened tightly enough.
4. Check Your Head For Any Gaps
Head gaps are one of the biggest problems that could occur if you do not properly wear your gear. This includes your hat, helmet, and goggles and a head gap is when your goggles fail to cover your entire face and leave gaps for cold air to get in.
This will cause discomfort all day as the wind blows and the cold air bothers you. It is important to make sure that no gaps are present before heading off onto the mountain with your snowboard for the day.
5. Strap & Adjust Your Helmet If Needed
Finally, you can make the last adjustments to ensure everything is fastened tightly. Now it is time to head off and enjoy your day snowboarding with extra warmth, comfort, and protection from your goggles.
Other Tips To Avoid Problems With Your Goggles
Some things can go wrong when you are snowboarding. It is important to be aware of these things and take precautions so you won't have any surprises when you get your gear on.
To avoid snowboarding problems, you need to ensure that your snowboarding goggles are always in top shape. The following are some tips to consider when choosing snowboarding goggles and putting them on before your day on the mountain.
Pick The Right Size
To avoid unnecessary headaches, try to find goggles of the right size so you will be able to fit them properly. The first step is to measure your face and choose your goggles according to your measurements.
When picking the perfect pair of snowboard goggles, always make sure that they are big enough for the head size. If it's too small, you'll end up being uncomfortable because they fit too tightly.
Always Wear a Beanie Underneath
Always wear a beanie underneath your snowboard goggles for extra warmth and comfort. It will also protect your goggles from scratching and sliding off. It will also help with keeping your goggles in place throughout the day.
Wearing a beanie or hat will protect against harsh wind chill temperatures and also increase visibility, which is beneficial for safety reasons. This is the best way to stay warm even on the coldest days and still enjoy your day snowboarding.
Choose The Best Lens
Be sure to take the time to pick the best lens for your snowboard goggles too. There are many different colors, shades, and variations that can be used so you need to be sure that you pair the right one with your needs.
It is ideal to have multiple options as the seasons and weather change. For example, if there is less sunlight you would be best suited to use a lens that lets in more light to help improve your visibility while riding.